Foss protein stills

Foss protein stills Kjeltec 8000 The series consists of 3 model line: 8100, 8200 and 8400 formal analysis of protein – Protein with different automation levels.

Kjeltec protein stills 8400 combined with the sample 8420 or 8460 and the automatic model Tecator lagoon created a distillation system fully automated protein by the method Kjeldahl analysis.

Protein analysis line very economical model 8200 with the semi-automatic mechanism driven out completely accurate results with high recovery mode on 99.5%.

may-cat-dam-foss — **Take Foss Kjeltec protein machine 8000 Series**

Based on the method of Kjeldahl nitrogen analyses

Initially, templates are in strong sulfuric acid in the presence of a catalyst switch nitrogen compounds help about the form of ammonium ions. The ammonium ions are then converted to ammonia gas NH3, heat and distillation. NH3 gas is absorbed by Boric acid H3BO3. Then, was titrated by standardized solution 0.1 N H2SO4.

More integrated titration the automatic color

Benefits of automation of your protein take Foss

The use of the included template automatically with 20 or 60 the location provides quick analysis room even when there's little more samples. You just put the template up shelf system stored protein automatically perform accurate analysis without supervision, to help you save time up to 4 now.

Distillation of optimal protein solutions

Precision pump system, good endurance offers the ability to transport the chemical stability and precision. Cooling water control system and automatic protection sensor when the temperature is too hot. Integrated monitoring sensors in multiple locations: safe door, water levels and chemicals, the level of purity, defend them help the absolute safety when operating the machines stored protein Foss Kjeltec 8000 series.

The technology reduces the thermal reaction between Acid and Alkali, remove the affected the results before the sample dilution.

Easy maintenance

Design of the standard modular degrees a smart way to eliminate many manual operations, protein distillation system always clean even when less maintenance. The titration system smart design reduce the bubbles causing the error in the measured results.

Color touch screen controls

-Protein distillers with the intuitive color touch screen is easy to do, easy to manipulate. Flexibility in the , view and set parameters of protein analysis method. Can connect to the computer and the printer communication port supports data quickly. Meet the standards of the world's lab.

Compare the difference to keep the protein still Foss Kjeltec 8000 Series

PROTEIN DISTILLATION EQUIPMENT	KJETEC^TM8100	KJETEC^TM8200	KJETEC^TM8400
Traffic changes slightly unpressurized	X	X	X
Check weather the cooling water system	X	X	X
Cooling water flow control	X	X	X
Show temperature distillation	X	X	X
Head shot against confirmed by Polyproylene	X	X	X
Pump more chemicals	X	X	X
Automatically add caustic soda	X	X	X
Automatically add distilled water	X	X	X
Auto-exhaust		X	X
Collect waste water volume	X	X	X
Chemical alert	X	X	X
Tray inspired dripped	X	X	X
Automatic safety doors		X	X
Safety door interlock	X	X	X
Safety door can move	X	X	X
Takeoff tube replacement sensor protein	X	X	X
Standard color system		The upgrade is	X
Connect the external automatic titration		Options	Options
The calculation results			X
Data storage device in			40 batches
Computer software for data management			X
Archive data through computer software			Unlimited
The ability to connect:
The computer			X
Electronic Scales			X
The printer			X

There are no reviews yet.

Be the first to review “Máy cất đạm Foss” Cancel reply

The performance in 230 In
Model number automatically inserted:	Kjeltec^TM sampler 8420, 1 the tray with 20 Kjeldahl tube 250 ml or 400 ml Kjeltec^TM sampler 8460, 3 the tray with 20 Kjeldahl tube 250 ml or 400 ml
The ability to archive:	40 batches
Time analysis:	3.5 minutes in 30 mgN 6.5 minutes in 200 mg N
Distillation flow:	~ 40 mL/min
About measure:	0.1 – 200 mg N
Repeat mode:	1% RSD
The recovery rate:	>99.5% in the nitrogen content between 1 – 200 mgN
Drainage pipes:	200 ml under 10 seconds
Volume of buret:	35 ml
The resolution of the buret:	2.4µ L/step
Buret speed:	>0.5 ml/sec
The volume of the chemical pump:	0 – 150 ml
Delay time:	0 – 1800 seconds
SAfEPatented:	0 – 15 seconds
Required when installing:
The power source:	200 – 240 In 50 – 60 Hz
Voltage deviation allows	±10%
Power consumption:	2200In
Cooling water consumption:	3 liter/min at a temperature 25^theC 1 liter/min at a temperature 15^theC
Working environment temperature:	5 – 40ºC
Work humidity:	The largest: 80%
The weight:	KJETEC^TM8400	KJETEC^TM8420	KJETEC^TM8460
	35 kg	71 kg	89 kg
Size:	KJETEC^TM8400	KJETEC^TM8420	KJETEC^TM8460
	480 × 580 × 690 mm	645 × 840 × 900 mm	1000 × 800 × 900 mm