Air stirring from his heat of AREC. T

Superior efficiency

• Durability with the chemicals even when the surface gets scratched
• Maximum temperature 550oC
• Stirring volume up to maximum 15 liter
• Electronic speed regulation up to 1500 rpm

Reliable results

• SpeedServo mode make sure the speed doesn't change even when viscosity changes of form.
• Temperature setting mode and digital time
• Installation time up to 999 minutes with auto mode interrupts
• Superior speed control, even when stirred with low speed.

Recommendations when using the stir from thermal Arec. T

• Consider buying the bars and to stir support for the round floor containers.

Practical solutions

• Warning mode can be displayed when the temperature drops below 50 ° C
• The Panel is secured by IP42 mode with dedicated tracks

Convenience for users

• Porcelain shells are easy to clean and clean
• The LED interface increases visibility
• The outer shell is made from a material Po-ly-modern me, have the ability to resist the chemicals even when the surface from scratches
• The Panel placed sideways, for easy access and to observe the show.
• High power type of PCM

Very intuitive control panel.

• Table showing very bright and easy to read so that the user can easily adjust the temperature of the air stirred. By twisting the buttons in the middle of the plate can heat application temperature (up to 550oC), While the right button speed control (up to 1500 rpm).
• Air stirring from his heat of AREC. T mode can set operating time up to 999 minutes using the tuning button to the left of the display screen. As soon as the timer back to 0 then the stirring machine will automatically interrupt the stir and heat.
• As soon as the shutdown or after adjusting the temperature of 0, the Hot plate warning "warning will appear to ensure safety. As soon as the temperature is cool to 50oC, then this warning will disappear automatically.

Eye catching designs, use advanced materials Technopolyme

• Air stirring from his heat of AREC. T the first device is made completely from Liao technopolyme substance-the ideal material to resist acids, three-the Champs Elysees and the solvents.
• Air stirring from his heat AREC. T attraction design created the superior comfort. In addition, the tilt of the control panel are very thorough research in order to create the conditions for the use of.

Maximum protection when there are leaks – IP42:

• AREC heat panels. T ensure high safety levels for users thanks to the control panel and the dedicated flowing trench.
• The control panel can easily reach, be placed at a safe distance with the heat source and are protected against the threat caused by the spill solution thanks to the dedicated Groove.
• Pressure casting structure designed to not spill could affect the parts inside of air stirring heat.

Easy to clean, washing and great strength with chemicals

• Air stirring from his heat of AREC. T can clean easily. Using a damp cloth, all stains can be removed and the air stirring heat up again as the new.
• At the same time, the material is made up of plate-porcelain white, is an inert material and very hard, can resist most chemicals, If the negligence to bottom surface chemistry of thermal panels without any influence to the quality of the air stirred.