Isokinetic gas sampling device – Method of equi motivation
Characteristics of isokinetic gas sampling device
- Console with open gas pump bracket.
- Y = 1.0 ± 0.05 (The error is smaller than 2%); ∆H@ = 46.736 ± 3.81 (The error is smaller than 5.08)
- Barometer designed dual tilt, the vertical size is 254 mm, tilt the 25.4 mm deflection 0.1 mm
- High accuracy, Bronze valve can lock back to transportation.
- Temperature sensors help the stable temperature control.
- Led display C (or degrees F)
- Include Source, pump, digital clock, and the system of pipes and pump controller
- Separate thermal circuits should have easily controlled with the control panel.
- The dance steps of the clock is 0.01 minutes.
- Gas flow control valve has currency on.
- Sample tubes with a diameter of 1/2 " ,pitot there 3/8 '',pump pressure hose 1/4″
- Mercury manometers 0-30 "Hg
- Outer casing in aluminium,stainless steel doors.
- Power supply 110-220V/60Hz regulations, 4-pin Amphenol Military
- Sample rate 88 liters/minute and pressure of 1 "Hg, 57 liters/min and 15 "Hg, 26"Hg is the largest pressure.
- The durability of the cable is rather high abrasion-proof and with isokinetic gas sampling device
The aggregate sample Impinger tube box with insulation and heat-resistant filter box
- Due to the use of stainless steel for gas sampling equipment should isokinetic ESC can high corrosion.
- The pipe in the system for measuring is made from heat-resistant glass ,stainless steel quartz and metallic compounds from Nickel 600 diameter from 1/8 "to 1/2″ (the equivalent from 3.2 mm to 12.7 mm)
- It consists of the condensate system pipes made of glass and is paired with each other and have to use the filter membrane.
There are no reviews yet.