Introduction to hardness testers, thank you officer
Tablet hardness meter handset is produced from the German Confederation with the durability and quality of fit food product staff, the seeds of the plant for processing agricultural products, especially as animal feed.
By determining the hardness of tablets we will compare the different blends,quick and quality control without time consuming test in the laboratory..
The composition of the solid measure staff thank you
Tablet hardness measuring instrument be equipped 2 bearing different springs. With springs with 2.5 mm measurement range is 0-25 kg and with springs with 3.5 mm measurement range from 0-100 kg.
1. Clamping screw
2. The cap on
3. Measuring cylinder force
4. Transmission pieces
5. The loop directive
6. Springs
7. Plunger
8. Dynamic lead frame
9. The anvil
10. Positioning screw
Manual solid measure staff thank you
Set the measure of the level of 0 . When doing so press the piston backward slightly up on the.
Latest members need to try between the anvil and piston,then rotate the screw positioned to fixed template
Rotate the clamping screw until the staff breaks out. Read the results on the scale of the cylinder.
The bar indicator shown on the pressure units kg. Read the results on the scale.
After use remove the clamping screw is needed to reverse charged lai initial status.
All the parts should be cleaned and lubricated to allow easy movement and for the most accurate results.
Readers comments (0)