Dakota grain separator

Model: 757-Series

Manufacturer: Dakota

Particle separator Dakota compact design, easy operation as well as the operation of transport. Based on the principle of blow and gravity to sort the seeds obtained high results. Grains contain impurities such as dirt, pod should minimize the impact to the environment. Suitable for many applications in analysis, grain classification.

General introduction about the Dakota grain separator

Dakota grain separator use the air flow generated by a blower and motor when the air passing through the filter tube is attached to the output of the cooling fan (Depending on the type of tube) the air will classify the impurities such as dirt particles and crust on the top column trap area, While heavy and good grain quality assurance will stay on the bottom of the Cup.

Features ensure grain separator Dakota

The bottom of the Cup has the steel nets not guaranteed protection for the beads can fall off the. The grid contains the type “100 mesh”, “50 mesh” and “30 mesh” (Depending on the model).
The separation is controlled exactly by the calibration valve cap at the top of the column divider. Offers three sizes of columns:. 1 ½ “ID x 23¼” H, 3 “ID x 34¼” H, and 4 “ID x 35¼” H, This Plexxiglas structure allows to easily see the gas valve on the top of the column.
The timer allows adjusting the working time of the machine during a cycle (5 minutes)
Switches off / turn on the engine and the knob controls the speed of the fan.
Particle separator Dakota with detachable Cup could easily take the form of a simple way to clean. And the detachable tube column, the bulkheads in order to facilitate the move.
Grains contain impurities such as shell beads, dirt and particles do not reach the goal of prenatal diagnosis in the first column on the trap area, make sure no dirt to escape. Optimize the ability to avoid environmental contamination.

Size: 16 “L x 21″W x 32 “H

Grain weight: 155 lbs

Net weight: 110 lbs

Depending on the needs of the user, so there are many kinds of different model to let users can easily choose the right products for the purpose of use.

Model 757: use 115V/60 Hz power source, motor 1/3HP, 3450 RPM

Model 757/A: using 220V/60 Hz power source, motor 1/3HP, 3450 RPM

Model 757/C: 220V/50 Hz power usage, motor 1/3HP, 2850 RPM

Model 757-3: use the small filter tube (1-1/2” & 3”)

Model 757-4: use the tube type filter to (4”)

Model 757-RC: use mesh type 30 with 4 different pipe

Model 757-CUP100: use mesh type 100, can be used for 757-RC

Model 757-CUP50: use mesh type 50, can be used for 757-RC

Model 757-CUP30: use mesh type 30, can be used for 757-RC